dmesg - lame 161220
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-57-generic (buildd@lgw01-54) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 (Ubuntu 4.4.0-57.78-generic 4.4.35)
Command line: BOOT_IMAGE=/vmlinuz-4.4.0-57-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008069ffff] usable
BIOS-e820: [mem 0x00000000806a0000-0x00000000806a0fff] ACPI NVS
BIOS-e820: [mem 0x00000000806a1000-0x00000000806a1fff] reserved
BIOS-e820: [mem 0x00000000806a2000-0x000000008d34ffff] usable
BIOS-e820: [mem 0x000000008d350000-0x000000008ea89fff] reserved
BIOS-e820: [mem 0x000000008ea8a000-0x000000008eaccfff] ACPI data
BIOS-e820: [mem 0x000000008eacd000-0x000000008f27efff] ACPI NVS
BIOS-e820: [mem 0x000000008f27f000-0x000000008fa95fff] reserved
BIOS-e820: [mem 0x000000008fa96000-0x000000008fafefff] type 20
BIOS-e820: [mem 0x000000008faff000-0x000000008fafffff] usable
BIOS-e820: [mem 0x000000008fb00000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi: ESRT=0x8fa0ad98 ACPI=0x8ea97000 ACPI 2.0=0x8ea97000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 MPS=0xfc9e0
esrt: Reserving ESRT space from 0x000000008fa0ad98 to 0x000000008fa0add0.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8fb00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc90-0x000fcc9f] mapped at [ffff8800000fcc90]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x0320a000, 0x0320afff] PGTABLE
BRK [0x0320b000, 0x0320bfff] PGTABLE
BRK [0x0320c000, 0x0320cfff] PGTABLE
BRK [0x0320d000, 0x0320dfff] PGTABLE
BRK [0x0320e000, 0x0320efff] PGTABLE
BRK [0x0320f000, 0x0320ffff] PGTABLE
RAMDISK: [mem 0x32de8000-0x356ebfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008EA97000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008EA970A8 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008EAC13A0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008EA97200 02A19D (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008F27EC40 000040
ACPI: APIC 0x000000008EAC14B8 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008EAC1578 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008EAC15C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008EAC1600 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000008EAC1990 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000008EAC1A30 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008EAC4B88 00253E (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008EAC70C8 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008EAC7100 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
ACPI: SSDT 0x000000008EAC7128 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008EAC7C40 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000008EAC7C88 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: BGRT 0x000000008EACBFB8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: LPIT 0x000000008EAC8BC0 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000008EAC8C58 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008EAC8C80 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008EAC8F20 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000008EACBF28 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008EACBF60 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046effffff]
NODE_DATA(0) allocated [mem 0x46eff9000-0x46effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000046effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000008069ffff]
node 0: [mem 0x00000000806a2000-0x000000008d34ffff]
node 0: [mem 0x000000008faff000-0x000000008fafffff]
node 0: [mem 0x0000000100000000-0x000000046effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
On node 0 totalpages: 4178668
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8974 pages used for memmap
DMA32 zone: 574287 pages, LIFO batch:31
Normal zone: 56256 pages used for memmap
Normal zone: 3600384 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x806a0000-0x806a0fff]
PM: Registered nosave memory: [mem 0x806a1000-0x806a1fff]
PM: Registered nosave memory: [mem 0x8d350000-0x8ea89fff]
PM: Registered nosave memory: [mem 0x8ea8a000-0x8eaccfff]
PM: Registered nosave memory: [mem 0x8eacd000-0x8f27efff]
PM: Registered nosave memory: [mem 0x8f27f000-0x8fa95fff]
PM: Registered nosave memory: [mem 0x8fa96000-0x8fafefff]
PM: Registered nosave memory: [mem 0x8fb00000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88046ec00000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4113348
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-57-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16113344K/16714672K available (8432K kernel code, 1291K rwdata, 3960K rodata, 1484K init, 1316K bss, 601328K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:2048 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 4007.925 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8015.85 BogoMIPS (lpj=16031700)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff820b7000 - ffffffff820bf000)
ftrace: allocating 32063 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64126.80 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x806a0000-0x806a0fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8eacd000-0x8f27efff] (8069120 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 20:46:42, date: 12/20/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 35 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BC1A000 0007DD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BC12400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BC1A800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BC0E600 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdff30000-0xdff3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdff4d000-0xdff4dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdff48000-0xdff49fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdff4c000-0xdff4c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdff4b000-0xdff4b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdff44000-0xdff47fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdff40000-0xdff43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdff20000-0xdff2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdff4a000-0xdff4a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdff00000-0xdff1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [1002:67b1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xdfe00000-0xdfe3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xdfe40000-0xdfe5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdfe60000-0xdfe63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xdfd00000-0xdfd07fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1d.0: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: Enabled 6 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x806a0000-0x83ffffff]
e820: reserve RAM buffer [mem 0x8d350000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8fb00000-0x8fffffff]
e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
pci 0000:00:1b.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1b.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1b.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1b.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1d.0: BAR 14: assigned [mem 0x90400000-0x905fffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0x90600000-0x907fffff 64bit pref]
pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1b.0: bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1b.0: bridge window [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1d.0: PCI bridge to [bus 06]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0x90400000-0x905fffff]
pci 0000:00:1d.0: bridge window [mem 0x90600000-0x907fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd07fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:02: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0x90400000-0x905fffff]
pci_bus 0000:06: resource 2 [mem 0x90600000-0x907fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42000K (ffff880032de8000 - ffff8800356ec000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7c2de000-0x802de000] (64MB) mapped at [ffff88007c2de000-ffff8800802ddfff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1482266802.668:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x9e
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x9e
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x9e
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x9e
microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x9e
microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x9e
microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x9e
microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x9e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a2268f7e4ca1e818c997a5071614f42c2a90855b'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 12:897:801
usb usb2-port10: hash matches
acpi PNP0F03:00: hash matches
rtc_cmos 00:04: setting system clock to 2016-12-20 20:46:43 UTC (1482266803)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1484K (ffffffff81f44000 - ffffffff820b7000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1796K (ffff88000283f000 - ffff880002a00000)
Freeing unused kernel memory: 136K (ffff880002dde000 - ffff880002e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:17.0: version 3.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
amdgpu: module verification failed: signature and/or required key missing - tainting kernel
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Could not create tracefs 'fence_wait_end' directory
Could not create tracefs 'fence_wait_start' directory
Could not create tracefs 'fence_signaled' directory
Could not create tracefs 'fence_enable_signal' directory
Could not create tracefs 'fence_destroy' directory
Could not create tracefs 'fence_init' directory
Could not create tracefs 'fence_emit' directory
Could not create tracefs 'fence_annotate_wait_on' directory
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b100 irq 130
ata2: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b180 irq 130
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b300 irq 130
ata6: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b380 irq 130
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x174B:0xE324 0x80).
[drm] register mmio base: 0xDFE00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
[drm] probing gen 2 caps for device 8086:1901 = 261ad03/e
[drm] probing mlw for device 8086:1901 = 261ad03
amdgpu 0000:01:00.0: Invalid ROM contents
ATOM BIOS: E324
[drm] GPU post is not needed
amdgpu 0000:01:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used)
amdgpu 0000:01:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 512bits GDDR5
[TTM] Zone kernel: Available graphics memory: 8184996 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 2097152, num gpu pages 2097152
usb 1-5: new high-speed USB device number 2 using xhci_hcd
[drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
[drm] Internal thermal controller with fan control
[drm] amdgpu: dpm initialized
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000200000010, cpu addr 0xffff880454003010
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000200000020, cpu addr 0xffff880454003020
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000200000030, cpu addr 0xffff880454003030
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000200000040, cpu addr 0xffff880454003040
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000200000050, cpu addr 0xffff880454003050
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000200000060, cpu addr 0xffff880454003060
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000200000070, cpu addr 0xffff880454003070
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000200000080, cpu addr 0xffff880454003080
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000200000090, cpu addr 0xffff880454003090
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000002000000a0, cpu addr 0xffff8804540030a0
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000002000000b0, cpu addr 0xffff8804540030b0
[drm] Found UVD firmware Version: 1.64 Family ID: 9
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000108bd30, cpu addr 0xffffc90002238d30
[drm] Found VCE firmware Version: 50.10 Binary ID: 2
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000002000000d0, cpu addr 0xffff8804540030d0
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000002000000e0, cpu addr 0xffff8804540030e0
[drm] PCIE gen 3 link speeds already enabled
[drm] DAL is enabled
[drm] [FeatureOverride_overriden feature] Overridden FEATURE_ENABLE_GPU_SCALING is enabled now
[drm] [Backlight_Caps] This method is not supported
[drm] DC: create_links: connectors_num: physical:5, virtual:0
[drm] [HwTrace_Hotplug] Connector[0] description:signal 32
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC1 [1]
[drm] [HwTrace_Hotplug] Connector[1] description:signal 32
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC5 [5]
[drm] [HwTrace_Hotplug] Connector[2] description:signal 32
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC6 [6]
[drm] [HwTrace_Hotplug] Connector[3] description:signal 4
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC3 [3]
[drm] [HwTrace_Hotplug] Connector[4] description:signal 2
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC4 [4]
[drm] [IfTrace_DC] Display Core initialized
[drm] amdgpu: freesync_module init done ffff88008bfde900.
[drm] [Conn_Detect] [DP-1] Rx Caps: 11 0A 84 01 00 00 00 00 00 00 00 00 00 00 00 ^
usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB2.0 Hub
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
[drm] [Conn_LKTN] [DP-1] HBRx4 pass VS=0, PE=1^
[drm] SADs count is: -2, don't need to read it
[drm] [Conn_Detect] [DP-1] : [Block 0] 00 FF FF FF FF FF FF 00 30 AE 45 11 01 01 01 01 04 13 01 04 A5 34 20 78 22 CD 85 A3 57 4A 9E 25 13 50 54 AD CF 00 31 46 81 80 81 8C 95 00 95 0F B3 00 A9 40 D1 C0 28 3C 80 A0 70 B0 23 40 30 20 36 00 06 44 21 00 00 1A 1A 36 80 A0 70 38 23 40 30 20 25 00 06 44 21 00 00 1A 00 00 00 FD 00 32 4B 1E 4B 11 00 0A 20 20 20 20 20 20 00 00 00 FF 00 56 4D 2D 30 31 37 36 33 0A 20 20 20 20 00 09 ^
[drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = AE30, product_id = 1145, serial_number = 1010101, manufacture_week = 4, manufacture_year = 19, display_name = , speaker_flag = 0, audio_mode_count = 0
[drm] [HwTrace_Hotplug] link=0, dc_sink_in=ffff8804549ba000 is now Connected
[drm] DCHPD: connector_id=0: Old sink= (null) New sink=ffff8804549ba000
[drm] [HwTrace_Hotplug] link=1, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=1: dc_sink didn't change.
[drm] [HwTrace_Hotplug] link=2, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=2: dc_sink didn't change.
[drm] [HwTrace_Hotplug] link=3, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=3: dc_sink didn't change.
[drm] [HwTrace_Hotplug] link=4, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=4: dc_sink didn't change.
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] KMS initialized.
[drm] ring test on 0 succeeded in 12 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 9 succeeded in 5 usecs
[drm] ring test on 10 succeeded in 4 usecs
ata2: SATA link down (SStatus 4 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: INTEL SSDSA2M120G2GC, 2CV102M3, max UDMA/133
ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
ata5.00: ATAPI: PIONEER DVD-RW DVR-215D, 1.22, max UDMA/66
ata5.00: configured for UDMA/66
e1000e 0000:00:1f.6 eth0: registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f8:32:e4:72:7c:0b
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-215D 1.22 PQ: 0 ANSI: 5
[drm] ring test on 11 succeeded in 2 usecs
[drm] UVD initialized successfully.
sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg0 type 5
scsi 5:0:0:0: Direct-Access ATA INTEL SSDSA2M120 02M3 PQ: 0 ANSI: 5
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sda] Attached SCSI disk
usb 1-6: new full-speed USB device number 3 using xhci_hcd
[drm] DM_NOT_IMPL: dm_bandwidth_update
usb 1-6: New USB device found, idVendor=0b05, idProduct=17cb
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: BCM920702 Bluetooth 4.0
usb 1-6: Manufacturer: Broadcom Corp
usb 1-6: SerialNumber: 5CF3706E1684
[drm] ring test on 12 succeeded in 8 usecs
[drm] ring test on 13 succeeded in 1 usecs
[drm] VCE initialized successfully.
[drm] fb mappable at 0xC1227000
[drm] vram apper at 0xC0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:01:00.0 on minor 0
usb 1-5.3: new full-speed USB device number 4 using xhci_hcd
[drm] Atomic commit: SET crtc id 0: [ffff88008bfc3000]
[drm] [IfTrace_DC] dc_commit_targets: 1 targets
[drm] [IfTrace_DC] core_target 0x5c235b60: stream_count=1
[drm] [IfTrace_DC] core_stream 0x55390000: src: 0, 0, 1920, 1200; dst: 0, 0, 1920, 1200;
[drm] [IfTrace_DC] pix_clk_khz: 154000, h_total: 2080, v_total: 1235
[drm] [IfTrace_DC] link: 0
[drm] [Detection_DP caps] Link: 0 eDP panel mode supported: 0 eDP panel mode enabled: 0
[drm] [Conn_LKTN] [DP-1] HBRx4 pass VS=0, PE=1^
[drm] [Conn_Mode] [DP-1] {1920x1200, 2080x1235@154000Khz}^
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
usb 1-5.3: New USB device found, idVendor=046d, idProduct=c52b
usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.3: Product: USB Receiver
usb 1-5.3: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5.3/input2
tsc: Refined TSC clocksource calibration: 4007.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e149d3a, max_idle_ns: 440795336434 ns
usb 1-9: new low-speed USB device number 5 using xhci_hcd
input: Logitech M525 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.2/0003:046D:C52B.0003/0003:046D:4013.0004/input/input6
logitech-hidpp-device 0003:046D:4013.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M525] on usb-0000:00:14.0-5.3:1
usb 1-9: New USB device found, idVendor=04b3, idProduct=3025
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: USB NetVista Full Width Keyboard.
usb 1-9: Manufacturer: LITE-ON Technology
usb 1-9: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:04B3:3025.0005/input/input7
hid-generic 0003:04B3:3025.0005: input,hidraw2: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:14.0-9/input0
usb 1-5.4: new full-speed USB device number 6 using xhci_hcd
usb 1-5.4: New USB device found, idVendor=045e, idProduct=0745
usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.4: Product: Microsoft® 2.4GHz Transceiver v7.0
usb 1-5.4: Manufacturer: Microsoft
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4:1.0/0003:045E:0745.0006/input/input8
hid-generic 0003:045E:0745.0006: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-5.4/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4:1.1/0003:045E:0745.0007/input/input9
usb 1-10: new high-speed USB device number 7 using xhci_hcd
hid-generic 0003:045E:0745.0007: input,hidraw4: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-5.4/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4:1.2/0003:045E:0745.0008/input/input10
hid-generic 0003:045E:0745.0008: input,hiddev0,hidraw5: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-5.4/input2
usb 1-10: New USB device found, idVendor=046d, idProduct=c629
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: SpacePilot PRO
usb 1-10: Manufacturer: 3Dconnexion
input: 3Dconnexion SpacePilot PRO as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C629.0009/input/input11
hid-generic 0003:046D:C629.0009: input,hidraw6: USB HID v1.11 Multi-Axis Controller [3Dconnexion SpacePilot PRO ] on usb-0000:00:14.0-10/input1
usb 1-12: new full-speed USB device number 8 using xhci_hcd
[drm] DM_NOT_IMPL: dm_bandwidth_update
usb 1-12: New USB device found, idVendor=045e, idProduct=0291
usb 1-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
clocksource: Switched to clocksource tsc
NET: Registered protocol family 38
random: nonblocking pool is initialized
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
systemd-journald[480]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input12
input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input13
input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.4/input/input14
input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.6/input/input15
usbcore: registered new interface driver xpad
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
Bluetooth: hci0: sputnik
snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1467
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input29
asus_wmi: Number of fans: 1
Adding 16715260k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:16715260k SSFS
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
audit: type=1400 audit(1482266816.867:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1124 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1122 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1123 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1123 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1123 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1117 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1117 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1117 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1117 comm="apparmor_parser"
audit: type=1400 audit(1482266816.867:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1121 comm="apparmor_parser"
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x5c235b60
[drm] DM_NOT_IMPL: dm_bandwidth_update